The # 367 Flat, Hot Rod, Satin Black, Is a Single Stage Acrylic Enamel, 1 Quart  Paint Kit.
This is a Flat NO GLOSS Paint
NOT MIXED TO ANY PAINT CODE!!!!
FOR PROFESSIONAL USE
TO GET THE FLAT FINISH, SPRAY IT ON IN LIGHT COATS. TO GET THE SATIN FINISH ( WITH A LITTLE GLOSS ) SPRAY IT ON IN WET COATS.
The Paint Kit Includes
1 ~ Quart Flat Acrylic Enamel Paint ( Factory Pack )
1/2 ~ Pint of Medium Temp Reducer
1/4 ~ Pint of Acrylic Enamel Hardener
Sticks, Strainers, Mixing Cup.
Mix is 8 Parts paint to 1 Part Hardener to 1 to 2 Parts Reducer.
The amount of Reducer will depend on how you like to spray and the type of spray gun you use.
Flash Time Between Coats @ 70 Degrees is About 15 Minutes. You Will Need to Spray 4 to 5 Coats of Paint.
This Paint Can Be Cleared With a Urethane Clear Coat. Non Metallic Paint, Clear after a 15 Minute Flash Time,
Metallic Paint Let Dry 1 to 1 1/2 Hours Before Clearing.
This Paint is Made in the USA, in Missouri
Factory Packs are Mix in Large Volumes at a Time.
Like all Paint Products, Approved Safety Equipment, and Clothing Should Be Use.
WE CAN ONLY SHIP TO THE LOWER 48 STATES. GROUND SHIPPING ONLY
ANY QUESTIONS; Please Call
Store  4176324894
Store Hours ~ Monday – Friday 8:00 to 5:00 CST